Pocket knife Purchase guide part 2

Handmade DamascusPocket Knives  Edges: Fully saw, partially or serrated Plain

You can not buy a pocket knife and without pondering the great debate vs. jagged smooth edge. What makes this decision even more difficult is that most models come with the option of friction paddles, partially jagged and even sometimes completely jagged. To help you analyze through the information and find out which edge suits your needs, we have established the pros and cons of each.

Introduction

 For centuries, there was only one type of edge: smooth singing. It was not until relatively recently that jagged edges began to grow in popularity. To really understand the basic difference between the two, we first have to look at the types of cuts a knife can make. The first is a push cut. This is done when you press a knife through something, such as shaving or peeling an apple. The second is the traction cut. These are cuts that require you to pull the knife through something in order to cut it, such as cutting the rope or cutting a piece of bread.

smooth ridge

 
 Advantages: The general consensus is that having a pocket knife with a smooth edge is better in performing push cuts. In the same line, the sharp edge only allows you to have better control, greater precision and cleaner cuts. A separate advantage is that smooth edges are significantly easier to sharpen and do not require that they be sent back to the factory for sharpening.
 Disadvantages: One of its main disadvantages is its inability to saw and perform extraction cuts. Similar to the way you can not cut a slice of bread with a knife with a smooth edge, you can not cut objects that require sawing movements very efficiently.
 Recommended uses: If you find yourself performing thrust cuts throughout the day, a smooth edge suits you well. Although it does not work well in wood or rope, they excel in things like shaving and skinning animals.

Edge completely serrated

 
 Advantages: The disadvantages of the smooth edge are the advantages of the completely serrated edge. A better job is done with the cutting of hard materials. The reason for this is that the additional force comes from the highest pressure per area due to stretch marks. Stretch marks also tend to be thinner, which allows them to cut better than knives with a smooth edge.
 Disadvantages: the knives of saw, although better in the cut of hard materials, are much more awkward than the flat leaves. You could, for example, not want a doctor to perform the surgery with a saw blade unless you want punctive cuts serrated in your vital organs. Stretch marks are also significantly harder to sharpen. In most cases, if you keep the original sheet, you would have to send it back to the factory for sharpening.Recommended uses: When taking stock of your daily tasks and note that there is a lot of cutting and sawing strength, a serrated edge is your best bet. Although it has some limitations, a saw blade is totally useful in specific situations.
 

Partially serrated edge (Combo Edge)

 
 Advantages: A partially serrated edge is a mixture of both edge types and has exceeded the fully jagged edge in popularity. The combined edge is more popular, since it allows the use of part of the blade for the thrust cuts and the other part for the rigorous cutting.
 Disadvantages: The combined edge has some of the same disadvantages of a serrated edge, such as sharpening difficulties. However, other aspects, such as their clumsiness, are fixed by the flat part of the knife. Another aspect to consider is the placement of the teeth in the blade, since they are not always useful for certain tasks.Recommended uses: If you are looking for the best of both worlds, a partially serrated edge is the way to go. It combats some of the negative aspects of jagged edges, but allows you to maintain the capacity of sawing on your knife.



 

The choice of the sheet Wide

 When navigating through pocket knives, you will see a wide range of blade lengths-from the huge 7.5-inch blade in the cold steel Sword XL to small 2-inch blades found in many multi-tools. Although there can only be a difference of a few inches, the size of the blade can make a big difference.

 
 Like all the other considerations involved in buying a pocket knife, this is usually a matter of preference. Still, break down some of the pros and cons of the different blade lengths below.

small leaves (less than 2.75 inches)

 
 Advantages: It may seem more advantageous to get a larger pocket knife, but knives with 2.75-inch blades and shorter has a number of benefits. The first, and many times more important, is that pocketknife assets with small leaves are usually legal everywhere. Many game laws of knives of arbitrarily acceptable length below 2.75 inches, so having one of these smaller knives will ensure that you are compatible with almost all knife laws.
 Smaller shovels also have the advantage of being, too, small. Its size allows an easy to carry that is not as burdensome as large knives.
 Disadvantages: The obvious disadvantage of small blades is that they are not as strong or versatile as larger blades. Due to their size, they are often slip joint sheets, which means they do not fit in place and are prone to fail during extreme use.Recommended uses: These are good to carry light every day when only the knife is used for basic tasks around the house, such as cutting rope or opening small boxes.
Note: This is part 2 in part 5 series.